# include # define unch unsigned char # define unint unsigned int # define OE RE0 # define WR RE1 # define GS RE2 //373鎖存器的片選端

//延時程序 void delay(void) { unint i; for(i = 0;i < 0xfff;i++) continue; } //RAM讀程序 void read(unch *data,unint address,unch num) { unint addressl,addressh; unint i; for(i = 0;i < num;i++,data++) { addressh = address % 256; addressl = address / 256; TRISE = 0x00; //設置RE端為輸出 TRISD = 0x00; TRISB = 0x00; GS = 1; //鎖存器的使能端 PORTD = addressl; //D口設置為地址低8位 PORTB = addressh; //A口設置為地址高5位 asm("nop"); asm("nop"); GS = 0; WR = 1; OE = 0; TRISD = 0xFF; *data = PORTD; //讀入數(shù)據(jù) asm("nop"); asm("nop"); OE = 1; address = address + 1; } } //RAM寫程序 void write(unch *data, unint address, unint num) { unint addressl,addressh; unint i; for(i = 0;i < num; i++,data++) { addressh = address % 256; addressl = address / 256; TRISE = 0x00; //設置RE口為輸出 TRISD = 0x00; TRISB = 0x00; GS = 1; //鎖存器的使能端 PORTD = addressl; //D口設置為地址低8位 PORTA = addressh; //A口設置為地址低5位 asm("nop"); asm("nop"); GS = 0; //鎖存地址 WR = 0; PORTD = *data; asm("nop"); asm("nop"); WR = 1; address = address + 1; } }

main() { unch string[],str[5]={0x23,0x34,0x54,0x23,0x72}; write(str,0,5); TRISA = 0xFF; TRISB = 0xFF; TRISE = 0xFF; TRISD = 0xFF; read(string,0,5); while(1); }